Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball bearing (5), Clip (1), Hex (1), Nut (1), Shim (8)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (78), Ball joint (57), battery (74), Battery holder (27), Bearing (48), Belt (88), Bevel gear (18), Body mount parts (18), Body post (25), Brake (56), Bulkhead (209), Bumper (69), C-Hub (85), Chassis (272), Clip (14), Clutch (139), CVD (53), Damper (2), deck (88), Diff (166), Drive shaft (165), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (7), Flywheel (20), Fuel Tank / tube (7), Hex (43), Impact (1), Layshaft (22), M3 (45), M4 (15), Motor Holder (4), O-ring (9), Pin (135), Pinion gear (133), Pivot Ball (50), Pivot Pin (50), Pulley (66), Radio plate / RX box (11), Rear hub (12), Rear Wing (23), Servo (136), Servo Horn (7), Servo horn / mount (7), Servo saver (64), shaft (283), Shim (113), Shock parts (69), Shock tower (114), Soft (41), Spring (487), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (51), Upper/Top Deck (18), Upright (39), weight (41), Wheel hub (39)
Thread Size:
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR308308-K - ULP ALU SHOCK ABSORBER-SET - BLACK - V2 (2)
ULP ALU SHOCK ABSORBER-SET - BLACK - V2 (2) XR308308-K
€54.50 (RRP inc. VAT)
#XR322086 - ALU SHOCK TOWER FRONT 3.0MM - SWISS 7075 T6 - V2
ALU SHOCK TOWER FRONT 3.0MM - SWISS 7075 T6 - V2 XR322086
€28.08 (RRP inc. VAT)
#XR322400 - XB2 ANTI-ROLL BAR FRONT 1.0MM SET
XB2 ANTI-ROLL BAR FRONT 1.0MM SET XR322400
€17.72 (RRP inc. VAT)
#XR322461 - XB2 ANTI-ROLL BAR FRONT 1.1 MM
XB2 ANTI-ROLL BAR FRONT 1.1 MM XR322461
€8.98 (RRP inc. VAT)
#XR322462 - XB2 ANTI-ROLL BAR FRONT 1.2 MM
XB2 ANTI-ROLL BAR FRONT 1.2 MM XR322462
€8.98 (RRP inc. VAT)
#XR323043 - ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR - 7075 T6
ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR - 7075 T6 XR323043
€36.24 (RRP inc. VAT)
#XR323088 - ALU SHOCK TOWER REAR - LCG - 3.0MM - SWISS 7075 T6
50%
OFF
ALU SHOCK TOWER REAR - LCG - 3.0MM - SWISS 7075 T6 XR323088
€43.04 (RRP inc.VAT)
€21.53 (RRP inc. VAT)
#XR324101 - SLIPPER ELIMINATOR - LCG - SET
SLIPPER ELIMINATOR - LCG - SET XR324101
€36.71 (RRP inc. VAT)
#XR329910-M - 2WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE (2)
2WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE (2) XR329910-M
€6.65 (RRP inc. VAT)
#XR355013 - CENTRAL DIFFERENTIAL - LARGE - SET - V2
CENTRAL DIFFERENTIAL - LARGE - SET - V2 XR355013
€113.00 (RRP inc. VAT)
#XR361108 - XB4'20 ALU CHASSIS - SWISS 7075 T6 (2.5MM)
XB4'20 ALU CHASSIS - SWISS 7075 T6 (2.5MM) XR361108
€144.18 (RRP inc. VAT)
#XR363084 - ALU SHOCK TOWER REAR 3.0MM - SWISS 7075 T6 - V2
ALU SHOCK TOWER REAR 3.0MM - SWISS 7075 T6 - V2 XR363084
€42.73 (RRP inc. VAT)
#XR364941 - STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 41T
STEEL DIFFERENTIAL BEVEL GEAR FOR LARGE VOLUME DIFF 41T XR364941
€61.37 (RRP inc. VAT)
#XR365361 - ALU WHEEL HUB 12MM - OFFSET "-1.25MM" (2)
ALU WHEEL HUB 12MM - OFFSET "-1.25MM" (2) XR365361
€21.37 (RRP inc. VAT)
#XR369902-M - 4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE (10)
4WD FRONT WHEEL AERODISK WITH 12MM HEX IFMAR - WHITE (10) XR369902-M
€26.84 (RRP inc. VAT)
#GR2003 - M3 x 10mm Countersunk Head Titanium Screw (10)
M3 x 10mm Countersunk Head Titanium Screw (10) GR2003
€6.95 (RRP inc. VAT)
#GR2005 - M3 x 8mm Button Head Titanium Screw (10)
M3 x 8mm Button Head Titanium Screw (10) GR2005
€6.95 (RRP inc. VAT)
#GR2006 - M3 x 10mm Button Head Titanium Screw (10)
M3 x 10mm Button Head Titanium Screw (10) GR2006
€6.95 (RRP inc. VAT)
#GR2007 - M3 x 6mm Countersunk Head Alloy Screw - Orange (10)
M3 x 6mm Countersunk Head Alloy Screw - Orange (10) GR2007
€6.95 (RRP inc. VAT)
#GR2008 - M3 x 8mm Countersunk Head Alloy Screw - Orange (10)
M3 x 8mm Countersunk Head Alloy Screw - Orange (10) GR2008
€6.95 (RRP inc. VAT)
#GR2009 - M3 x 10mm Countersunk Head Alloy Screw - Orange (10)
M3 x 10mm Countersunk Head Alloy Screw - Orange (10) GR2009
€6.95 (RRP inc. VAT)
#GR2011 - M3 x 8mm Button Head Alloy Screw - Orange (10)
M3 x 8mm Button Head Alloy Screw - Orange (10) GR2011
€6.95 (RRP inc. VAT)
#GR2012 - M3 x 10mm Button Head Alloy Screw - Orange (10)
M3 x 10mm Button Head Alloy Screw - Orange (10) GR2012
€6.95 (RRP inc. VAT)
#GR2013 - M3 x 6mm Countersunk Head Brass Screws (10)
M3 x 6mm Countersunk Head Brass Screws (10) GR2013
€4.63 (RRP inc. VAT)
#GR2014 - M3 x 8mm Countersunk Head Brass Screws (10)
M3 x 8mm Countersunk Head Brass Screws (10) GR2014
€4.63 (RRP inc. VAT)
#GR2016 - M3 x 12mm Button Head Alloy Screw - Orange (10)
M3 x 12mm Button Head Alloy Screw - Orange (10) GR2016
€6.95 (RRP inc. VAT)
#GR2102 - M3 Alloy Servo-Loc Countersunk Washer - Orange (4)
M3 Alloy Servo-Loc Countersunk Washer - Orange (4) GR2102
€5.78 (RRP inc. VAT)
#GR2103 - M4 Serrated Alloy Wheel Nuts - Black (4)
M4 Serrated Alloy Wheel Nuts - Black (4) GR2103
€5.78 (RRP inc. VAT)
#GR2104 - M4 Serrated Alloy Wheel Nuts - Orange (4)
M4 Serrated Alloy Wheel Nuts - Orange (4) GR2104
€5.78 (RRP inc. VAT)
#GR2201 - Light Weight Alloy Parts Tray - Black
Light Weight Alloy Parts Tray - Black GR2201
€5.78 (RRP inc. VAT)
#GR2202 - Light Weight Alloy Parts Tray - Orange
Light Weight Alloy Parts Tray - Orange GR2202
€5.78 (RRP inc. VAT)
#DY298017 - HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS
HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS DY298017
€8.11 (RRP inc. VAT)
#XR301000 - T4'20 GRAPHITE CHASSIS 2.2MM
T4'20 GRAPHITE CHASSIS 2.2MM XR301000
€133.78 (RRP inc. VAT)
#XR301001 - T4'20 ALU SOLID CHASSIS 2.0MM - SWISS 7075 T6
T4'20 ALU SOLID CHASSIS 2.0MM - SWISS 7075 T6 XR301001
€133.78 (RRP inc. VAT)
#XR301002 - T4'20 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6
36%
OFF
T4'20 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 XR301002
€147.42 (RRP inc.VAT)
€94.09 (RRP inc. VAT)
#XR301172 - ALU UPPER DECK COLLAR FOR FLEX ELIMINATION
ALU UPPER DECK COLLAR FOR FLEX ELIMINATION XR301172
€12.32 (RRP inc. VAT)
#XR301550 - T4'20/T4'21 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R)
T4'20/T4'21 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) XR301550
€54.50 (RRP inc. VAT)
#XR301960 - T4'20/T4'21 ULP GRAPHITE SHOCK TOWER FRONT 3.0MM
T4'20/T4'21 ULP GRAPHITE SHOCK TOWER FRONT 3.0MM XR301960
€24.48 (RRP inc. VAT)
#XR302537 - T4'20/T4'21 ALU STEERING POST FOR DUAL SERVO SAVER (2)
T4'20/T4'21 ALU STEERING POST FOR DUAL SERVO SAVER (2) XR302537
€13.87 (RRP inc. VAT)
#XR302544 - ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM (2)
ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM (2) XR302544
€9.16 (RRP inc. VAT)
#XR302713 - T4'20/T4'21 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF
T4'20/T4'21 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF XR302713
€34.66 (RRP inc. VAT)
#XR302723 - T4'20/T4'21 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR
T4'20/T4'21 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR XR302723
€34.66 (RRP inc. VAT)
#XR302766 - T4'20 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L
T4'20 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L XR302766
€46.21 (RRP inc. VAT)
#XR302812 - T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.2 MM
T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.2 MM XR302812
€9.94 (RRP inc. VAT)
#XR302813 - T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.3 MM
T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.3 MM XR302813
€9.94 (RRP inc. VAT)
#XR302814 - T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM
T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM XR302814
€9.94 (RRP inc. VAT)
#XR302815 - T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.5 MM
T4'20/T4'21 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.5 MM XR302815
€9.94 (RRP inc. VAT)
#XR302960 - T4'20/T4'21 ULP GRAPHITE SHOCK TOWER REAR 3.0MM
T4'20/T4'21 ULP GRAPHITE SHOCK TOWER REAR 3.0MM XR302960
€40.92 (RRP inc. VAT)
#XR303433 - ALU ANTI-ROLL BAR BUSHING - 6MM (2)
ALU ANTI-ROLL BAR BUSHING - 6MM (2) XR303433
€15.06 (RRP inc. VAT)
#XR303457 - BALL JOINT 4.9MM - EXTRA SHORT OPEN (4)
BALL JOINT 4.9MM - EXTRA SHORT OPEN (4) XR303457
€6.30 (RRP inc. VAT)
#XR303723 - T4'20/T4'21 ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR
T4'20/T4'21 ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR XR303723
€34.66 (RRP inc. VAT)
#XR303730 - T4'20 ALU REAR LOWER 2-PIECE SUSPENSION HOLDER - FRONT (1)
T4'20 ALU REAR LOWER 2-PIECE SUSPENSION HOLDER - FRONT (1) XR303730
€15.47 (RRP inc. VAT)
#XR303760 - T4'20 ALU MOTOR MOUNT
T4'20 ALU MOTOR MOUNT XR303760
€50.83 (RRP inc. VAT)
#XR305435 - HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM
HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM XR305435
€19.26 (RRP inc. VAT)
#XR305436 - HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT 3 x 351 MM
HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT 3 x 351 MM XR305436
€23.06 (RRP inc. VAT)
#XR305523 - ALU SOLID LAYSHAFT WITH BEARINGS
ALU SOLID LAYSHAFT WITH BEARINGS XR305523
€34.66 (RRP inc. VAT)
#XR305578 - FIXED PULLEY FOR LAYSHAFT WITH BEARINGS 20T (2)
FIXED PULLEY FOR LAYSHAFT WITH BEARINGS 20T (2) XR305578
€8.65 (RRP inc. VAT)
#XR306204 - ALU SERVO MOUNT - BLACK
ALU SERVO MOUNT - BLACK XR306204
€34.66 (RRP inc. VAT)
#XR306208 - ALU SERVO MOUNT 21MM - BOTH SIDES THREADED
ALU SERVO MOUNT 21MM - BOTH SIDES THREADED XR306208
€12.32 (RRP inc. VAT)
#XR306234 - GRAPHITE FLOATING SERVO HOLDER NARROW 3.0MM
GRAPHITE FLOATING SERVO HOLDER NARROW 3.0MM XR306234
€18.60 (RRP inc. VAT)
#XR306410 - ALU UNIVERSAL MOUNT
ALU UNIVERSAL MOUNT XR306410
€13.37 (RRP inc. VAT)
#XR306517 - T4'20 ALU TOP DECK MOUNT
T4'20 ALU TOP DECK MOUNT XR306517
€10.75 (RRP inc. VAT)
#XR321161-H - COMPOSITE FRONT UPPER DECK FOR ANTI-ROLL BAR - HARD
COMPOSITE FRONT UPPER DECK FOR ANTI-ROLL BAR - HARD XR321161-H
€12.83 (RRP inc. VAT)
#XR321250 - COMPOSITE CHASSIS SIDE GUARDS FOR BENT SIDES CHASSIS L+R
COMPOSITE CHASSIS SIDE GUARDS FOR BENT SIDES CHASSIS L+R XR321250
€17.98 (RRP inc. VAT)
#XR321262-H - COMPOSITE FRONT LOWER CHASSIS BRACE - HARD - V2
COMPOSITE FRONT LOWER CHASSIS BRACE - HARD - V2 XR321262-H
€13.37 (RRP inc. VAT)
#XR321271 - GRAPHITE CHASSIS SIDE GUARD BRACE FOR BENT SIDES CHASSIS (2)
GRAPHITE CHASSIS SIDE GUARD BRACE FOR BENT SIDES CHASSIS (2) XR321271
€22.20 (RRP inc. VAT)
#XR322113-G - SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER RIGHT - GRAPHITE
SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER RIGHT - GRAPHITE XR322113-G
€11.04 (RRP inc. VAT)
#XR322113-H - SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER RIGHT - HARD
SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER RIGHT - HARD XR322113-H
€7.43 (RRP inc. VAT)
#XR322123-H - SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER LEFT - HARD
SUSP. ARM FRONT - LOW SHOCK MOUNTING - LOWER LEFT - HARD XR322123-H
€7.43 (RRP inc. VAT)
#XR323018 - COMPOSITE REAR MOTOR GEAR BOX - LCG - SET
COMPOSITE REAR MOTOR GEAR BOX - LCG - SET XR323018
€26.28 (RRP inc. VAT)
#XR323018-G - COMPOSITE REAR MOTOR GEAR BOX - LCG - GRAPHITE - SET
COMPOSITE REAR MOTOR GEAR BOX - LCG - GRAPHITE - SET XR323018-G
€38.84 (RRP inc. VAT)
#XR323019 - COMPOSITE FRONT MOTOR GEAR BOX - LCG - SET
COMPOSITE FRONT MOTOR GEAR BOX - LCG - SET XR323019
€26.28 (RRP inc. VAT)
#XR323019-G - COMPOSITE FRONT MOTOR GEAR BOX - LCG - GRAPHITE - SET
COMPOSITE FRONT MOTOR GEAR BOX - LCG - GRAPHITE - SET XR323019-G
€38.84 (RRP inc. VAT)
#XR323044 - COMPOSITE REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR
COMPOSITE REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR XR323044
€7.45 (RRP inc. VAT)
#XR323113-G - COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE
COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER RIGHT - GRAPHITE XR323113-G
€13.37 (RRP inc. VAT)
#XR323113-H - COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER RIGHT - HARD
COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER RIGHT - HARD XR323113-H
€9.22 (RRP inc. VAT)
#XR323123-G - COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER LEFT - GRAPHITE
COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER LEFT - GRAPHITE XR323123-G
€13.37 (RRP inc. VAT)
#XR323123-H - COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER LEFT - HARD
COMPOSITE DISENGAGED SUSPENSION ARM REAR LOWER LEFT - HARD XR323123-H
€9.22 (RRP inc. VAT)
#XR323400 - XB2 ANTI-ROLL BAR REAR 1.0MM SET
XB2 ANTI-ROLL BAR REAR 1.0MM SET XR323400
€17.72 (RRP inc. VAT)
#XR324016 - ALU MOTOR PLATE - LCG - SWISS 7075 T6
ALU MOTOR PLATE - LCG - SWISS 7075 T6 XR324016
€33.98 (RRP inc. VAT)
#XR324021 - COMPOSITE MOUNT FOR UPPER BRACE - LCG
COMPOSITE MOUNT FOR UPPER BRACE - LCG XR324021
€14.77 (RRP inc. VAT)
#XR324042 - COMPOSITE MOTOR UPPER BRACE - LCG
COMPOSITE MOTOR UPPER BRACE - LCG XR324042
€10.38 (RRP inc. VAT)
#XR324052 - COMPOSITE GEAR COVER - LCG
COMPOSITE GEAR COVER - LCG XR324052
€8.98 (RRP inc. VAT)
#XR324113 - ALU 3-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED
ALU 3-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED XR324113
€39.19 (RRP inc. VAT)
#XR324114 - ALU 2-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED
ALU 2-PAD TOP SHAFT 20T - LCG - SWISS 7075 T6 - HARD COATED XR324114
€39.19 (RRP inc. VAT)
#XR324128 - ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
ALU 3-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6 XR324128
€18.58 (RRP inc. VAT)
#XR324129 - ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE WITH ADAPTER - LCG - SWISS 7075 T6 XR324129
€18.58 (RRP inc. VAT)
#XR324238 - COMPOSITE GEAR 38T - LCG - GRAPHITE
COMPOSITE GEAR 38T - LCG - GRAPHITE XR324238
€8.98 (RRP inc. VAT)
#XR324902 - GEAR DIFFERENTIAL - LCG - SET
GEAR DIFFERENTIAL - LCG - SET XR324902
€65.48 (RRP inc. VAT)
#XR324911 - COMPOSITE GEAR DIFFERENTIAL COVER - LCG
COMPOSITE GEAR DIFFERENTIAL COVER - LCG XR324911
€7.45 (RRP inc. VAT)
#XR324911-G - COMPOSITE GEAR DIFFERENTIAL COVER - LCG - GRAPHITE
COMPOSITE GEAR DIFFERENTIAL COVER - LCG - GRAPHITE XR324911-G
€11.30 (RRP inc. VAT)
#XR324954 - COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG
COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG XR324954
€14.77 (RRP inc. VAT)
#XR324954-G - COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG - GRAPHITE
COMPOSITE GEAR DIFFERENTIAL CASE WITH PULLEY 53T - LCG - GRAPHITE XR324954-G
€20.28 (RRP inc. VAT)
#XR324962 - GEAR DIFF OUTDRIVE ADAPTER - LCG - HUDY SPRING STEELâ„¢ (2)
GEAR DIFF OUTDRIVE ADAPTER - LCG - HUDY SPRING STEEL™ (2) XR324962
€40.10 (RRP inc. VAT)
#XR325003 - BALL ADJUSTABLE DIFFERENTIAL - LCG - SET - HUDY SPRING STEELâ„¢
BALL ADJUSTABLE DIFFERENTIAL - LCG - SET - HUDY SPRING STEEL™ XR325003
€91.73 (RRP inc. VAT)
#XR325013 - BALL DIFFERENTIAL SHORT OUTPUT SHAFT - LCG - HUDY SPRING STEELâ„¢
BALL DIFFERENTIAL SHORT OUTPUT SHAFT - LCG - HUDY SPRING STEEL™ XR325013
€35.10 (RRP inc. VAT)
#XR325023 - BALL DIFFERENTIAL LONG OUTPUT SHAFT - LCG - HUDY SPRING STEELâ„¢
BALL DIFFERENTIAL LONG OUTPUT SHAFT - LCG - HUDY SPRING STEEL™ XR325023
€35.10 (RRP inc. VAT)
#XR325327 - REAR DRIVE SHAFT 77MM WITH 2.5MM PIN - HUDY SPRING STEELâ„¢
REAR DRIVE SHAFT 77MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR325327
€22.20 (RRP inc. VAT)
#XR326176 - COMPOSITE LIPO BATTERY HOLDER FOR BENT SIDES CHASSIS (2+2)
COMPOSITE LIPO BATTERY HOLDER FOR BENT SIDES CHASSIS (2+2) XR326176
€14.87 (RRP inc. VAT)
#XR352275 - ALU CASTER BLOCK 2° RIGHT - SWISS 7075 T6
 XR352275
€67.39 (RRP inc. VAT)