Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (78), Ball joint (57), battery (78), Battery holder (27), Bearing (109), Belt (90), Bevel gear (18), Body mount parts (18), Body post (25), Brake (56), Bulkhead (209), Bumper (69), C-Hub (85), Chassis (273), Clip (33), Clutch (139), CVD (53), Damper (2), deck (88), Diff (165), Drive shaft (166), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (9), Flywheel (20), Fuel Tank / tube (7), Hex (134), Impact (1), Layshaft (22), M3 (81), M4 (21), Motor Holder (4), O-ring (49), Pin (168), Pinion gear (133), Pivot Ball (50), Pivot Pin (50), Pulley (67), Radio plate / RX box (11), Rear hub (12), Rear Wing (23), Servo (171), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (288), Shim (123), Shock parts (69), Shock tower (114), Soft (41), Spring (491), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (51), Upper/Top Deck (18), Upright (39), weight (44), Wheel hub (39)
Scale:
18th (2)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Transmission:
4wd (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR354252 - GTX GRAPHITE CENTER MOUNTING PLATE 2.5MM
GTX GRAPHITE CENTER MOUNTING PLATE 2.5MM XR354252
€20.81 (RRP inc. VAT)
#XR355022-G - DIFFERENTIAL CASE - V2 - GRAPHITE
DIFFERENTIAL CASE - V2 - GRAPHITE XR355022-G
€20.44 (RRP inc. VAT)
#XR355023-G - CENTER DIFFERENTIAL CASE - V2 - GRAPHITE
CENTER DIFFERENTIAL CASE - V2 - GRAPHITE XR355023-G
€20.44 (RRP inc. VAT)
#XR355060 - FRONT/REAR DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL --- Replaced with #355061
FRONT/REAR DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL --- Replaced with #355061 XR355060
€20.89 (RRP inc. VAT)
#XR355161 - XB808 ACTIVE DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) --- Replaced with #355162
 XR355161
€20.89 (RRP inc. VAT)
#XR356240 - XB8E/XT8E GRAPHITE FAN HOLDER FOR SADDLE PACK ALTERNATIVE 2.5MM
XB8E/XT8E GRAPHITE FAN HOLDER FOR SADDLE PACK ALTERNATIVE 2.5MM XR356240
€18.28 (RRP inc. VAT)
#XR358451-S - GT 4-SHOE ALU CLUTCH PRESSURE SLEEVE - REINFORCED - 7075 T6
GT 4-SHOE ALU CLUTCH PRESSURE SLEEVE - REINFORCED - 7075 T6 XR358451-S
€17.87 (RRP inc. VAT)
#XR358452-S - GT 4-SHOE FLYWHEEL NUT - SLIM - HUDY SPRING STEELâ„¢
GT 4-SHOE FLYWHEEL NUT - SLIM - HUDY SPRING STEEL™ XR358452-S
€17.62 (RRP inc. VAT)
#XR364122 - ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - 7075 T6 HARD COATED
ALU PLATE FOR  MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - FRONT - 7075 T6 HARD COATED XR364122
€19.09 (RRP inc. VAT)
#XR364123 - ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - 7075 T6 HARD COATED
ALU PLATE FOR MULTI-ADJUSTABLE SLIPPER CLUTCH (MSC) - REAR - 7075 T6 HARD COATED XR364123
€19.58 (RRP inc. VAT)
#XR364126 - ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6
ALU PLATE FOR ONE-WAY SLIPPER CLUTCH - REAR - SWISS 7075 T6 XR364126
€20.16 (RRP inc. VAT)
#XR371063 - X1'16 ARM MOUNT PLATE - 2.5MM GRAPHITE
X1'16 ARM MOUNT PLATE - 2.5MM GRAPHITE XR371063
€20.03 (RRP inc. VAT)
#XR371064 - X1'17 ARM MOUNT PLATE - 2.5MM GRAPHITE
X1'17 ARM MOUNT PLATE - 2.5MM GRAPHITE XR371064
€20.03 (RRP inc. VAT)
#XR371065 - X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM
X1'19 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM XR371065
€20.03 (RRP inc. VAT)
#XR371066 - X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - NARROW TRACK-WIDTH - 2.5MM
X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - NARROW TRACK-WIDTH - 2.5MM XR371066
€20.03 (RRP inc. VAT)
#XR371067 - X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM
X1'20/X1'21 GRAPHITE ARM MOUNT PLATE - WIDE TRACK-WIDTH - 2.5MM XR371067
€20.03 (RRP inc. VAT)
#XR371075 - X1'16 REAR BRACE - 2.5MM GRAPHITE
X1'16 REAR BRACE - 2.5MM GRAPHITE XR371075
€20.03 (RRP inc. VAT)
#XR371077 - X1'18 GRAPHITE REAR BRACE 2.5MM
X1'18 GRAPHITE REAR BRACE 2.5MM XR371077
€20.03 (RRP inc. VAT)
#XR371212 - X12'21 GRAPHITE BUMPER LOWER HOLDER 2.5MM
X12'21 GRAPHITE BUMPER LOWER HOLDER 2.5MM XR371212
€19.09 (RRP inc. VAT)
#XR371291 - X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER PLATE - BLACK
X1 ALU BALL-BEARING ANTI-ROLL BAR HOLDER PLATE - BLACK XR371291
€19.24 (RRP inc. VAT)
#XR372127 - X1'21 GRAPHITE LOWER SUSPENSION ARM 2.5MM
X1'21 GRAPHITE LOWER SUSPENSION ARM 2.5MM XR372127
€19.61 (RRP inc. VAT)
#XR372135 - X1'21 GRAPHITE UPPER SUSPENSION ARM 2.5MM
X1'21 GRAPHITE UPPER SUSPENSION ARM 2.5MM XR372135
€19.24 (RRP inc. VAT)
#XR372503 - COMPOSITE SERVO SAVER - X-STIFF - SET - V2
COMPOSITE SERVO SAVER - X-STIFF - SET - V2 XR372503
€20.22 (RRP inc. VAT)
#XR373053 - X1'24 GRAPHITE REAR WING MOUNT 2.5MM
X1'24 GRAPHITE REAR WING MOUNT 2.5MM XR373053
€18.00 (RRP inc. VAT)
#XR373096 - ALU POD PLATE PIVOT HOLDER - SWISS 7075 T6
ALU POD PLATE PIVOT HOLDER - SWISS 7075 T6 XR373096
€19.58 (RRP inc. VAT)
#XR373391 - ALU POD PLATE PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6
ALU POD PLATE PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6 XR373391
€20.16 (RRP inc. VAT)
#XR373526 - X1'23 GRAPHITE REAR WING HOLDER SIDE PLATE 2.5MM (L+R)
X1'23 GRAPHITE REAR WING HOLDER SIDE PLATE 2.5MM (L+R) XR373526
€20.57 (RRP inc. VAT)
#XR375041 - X12 ALU REAR ONE-PIECE WHEEL HUB - LIGTHWEIGHT
X12 ALU REAR ONE-PIECE WHEEL HUB - LIGTHWEIGHT XR375041
€19.99 (RRP inc. VAT)
#XR930130 - CARBIDE BALL 3.175MM (12)
CARBIDE BALL 3.175MM  (12) XR930130
€20.59 (RRP inc. VAT)
#XR323311 - BRASS REAR LOWER SUSP. HOLDER - FRONT
50%
OFF
BRASS REAR LOWER SUSP. HOLDER - FRONT XR323311
€40.67 (RRP inc.VAT)
€20.34 (RRP inc. VAT)
#XR323321 - BRASS REAR LOWER SUSP. HOLDER - REAR
50%
OFF
BRASS REAR LOWER SUSP. HOLDER - REAR XR323321
€40.67 (RRP inc.VAT)
€20.34 (RRP inc. VAT)
#XR323323 - BRASS REAR LOWER SUSP. HOLDER - NARROW - REAR
50%
OFF
BRASS REAR LOWER SUSP. HOLDER - NARROW - REAR XR323323
€40.67 (RRP inc.VAT)
€20.34 (RRP inc. VAT)
#XR364945 - ALU DIFF. BEVEL GEAR 35T - 7075 T6 HARD COATED
50%
OFF
ALU DIFF. BEVEL GEAR 35T - 7075 T6 HARD COATED XR364945
€40.92 (RRP inc.VAT)
€20.46 (RRP inc. VAT)
#XR371149 - X1 GRAPHITE 2.0MM REAR POD LOWER PLATE
50%
OFF
X1 GRAPHITE 2.0MM REAR POD LOWER PLATE XR371149
€40.07 (RRP inc.VAT)
€20.04 (RRP inc. VAT)
#DY106205 - HUDY WASH BOX
HUDY WASH BOX DY106205
€19.80 (RRP inc. VAT)
#DY293443 - ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - OFFSET 2-HOLE M3 - 25T
 DY293443
€18.72 (RRP inc. VAT)
#DY293446 - ALU CLAMP THROTTLE SERVO HORN - FUTABA, SAVÖX - 2-HOLE - 25T
 DY293446
€18.72 (RRP inc. VAT)
#DY293496 - ALU THROTTLE SERVO HORN - FUTABA, SAVÖX - OFFSET 2-HOLE M3 - 25T - V2
 DY293496
€13.20 (RRP inc. VAT)
#DY293506 - ALU THROTTLE SERVO HORN - FUTABA, SAVÖX - 2-HOLE - 25T - V2
 DY293506
€13.20 (RRP inc. VAT)
#DY294150 - HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 50T / 64
HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED -  50T / 64 DY294150
€15.12 (RRP inc. VAT)
#DY294151 - HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 51T / 64
HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED -  51T / 64 DY294151
€18.94 (RRP inc. VAT)
#DY294152 - HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 52T / 64
HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED -  52T / 64 DY294152
€14.04 (RRP inc. VAT)
#DY294153 - HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 53T / 64
HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED -  53T / 64 DY294153
€18.94 (RRP inc. VAT)
#DY294154 - HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED - 54T / 64
HUDY ALU ULTRA-LIGHT PINION GEAR - HARD COATED -  54T / 64 DY294154
€14.04 (RRP inc. VAT)
#DY294259 - HUDY ALU PINION GEAR - HARD COATED - 19T / 32 (MODUL 0.8)
HUDY ALU PINION GEAR - HARD COATED - 19T / 32 (MODUL 0.8) DY294259
Login & Backorder
€19.03 (RRP inc. VAT)
#DY294262 - HUDY ALU PINION GEAR - HARD COATED - 22T / 32 (MODUL 0.8)
HUDY ALU PINION GEAR - HARD COATED - 22T / 32 (MODUL 0.8) DY294262
Login & Backorder
€19.34 (RRP inc. VAT)
#DY294263 - HUDY ALU PINION GEAR - HARD COATED - 23T / 32 (MODUL 0.8)
HUDY ALU PINION GEAR - HARD COATED - 23T / 32 (MODUL 0.8) DY294263
Login & Backorder
€19.34 (RRP inc. VAT)
#DY294264 - HUDY ALU PINION GEAR - HARD COATED - 24T / 32 (MODUL 0.8)
HUDY ALU PINION GEAR - HARD COATED - 24T / 32 (MODUL 0.8) DY294264
Login & Backorder
€19.66 (RRP inc. VAT)
#DY294265 - HUDY ALU PINION GEAR - HARD COATED - 25T / 32 (MODUL 0.8)
HUDY ALU PINION GEAR - HARD COATED - 25T / 32 (MODUL 0.8) DY294265
Login & Backorder
€19.66 (RRP inc. VAT)
#XR301209 - T4F GRAPHITE BUMPER UPPER HOLDER 2.0MM
T4F GRAPHITE BUMPER UPPER HOLDER 2.0MM XR301209
€19.64 (RRP inc. VAT)
#XR301232 - FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - HARD
FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - HARD XR301232
€19.67 (RRP inc. VAT)
#XR301237 - X4F FOAM BUMPER FOR 100g WEIGHT - HARD
X4F FOAM BUMPER FOR 100g WEIGHT - HARD XR301237
€18.18 (RRP inc. VAT)
#XR302780 - X4F ALU REAR BULKHEAD - FRONT - SWISS 7075 T6
X4F ALU REAR BULKHEAD - FRONT - SWISS 7075 T6 XR302780
€18.00 (RRP inc. VAT)
#XR302781 - X4F ALU REAR BULKHEAD - REAR - SWISS 7075 T6
X4F ALU REAR BULKHEAD - REAR - SWISS 7075 T6 XR302781
€18.00 (RRP inc. VAT)
#XR303042 - T2 REAR UPPER DECK 2.5MM GRAPHITE - CNC MACHINED
T2 REAR UPPER DECK 2.5MM GRAPHITE - CNC MACHINED XR303042
€19.07 (RRP inc. VAT)
#XR303054-O - T4 ALU LAYSHAFT BULKHEAD L/R - ORANGE
T4 ALU LAYSHAFT BULKHEAD L/R - ORANGE XR303054-O
€19.07 (RRP inc. VAT)
#XR303056-O - T4 ALU LAYSHAFT BULKHEAD CLOSED L/R - ORANGE
T4 ALU LAYSHAFT BULKHEAD CLOSED L/R - ORANGE XR303056-O
€19.07 (RRP inc. VAT)
#XR303088 - T2R FRP SHOCK TOWER REAR
T2R FRP SHOCK TOWER REAR XR303088
€19.86 (RRP inc. VAT)
#XR303732 - T4'21 ALU REAR SUSP. HOLDER WITH CENTERING PIN - FRONT (1)
T4'21 ALU REAR SUSP. HOLDER WITH CENTERING PIN - FRONT (1) XR303732
€18.36 (RRP inc. VAT)
#XR304930 - COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4)
COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) XR304930
€19.07 (RRP inc. VAT)
#XR305022 - T2'008 ALU T6 DIFF SHORT OUTPUT SHAFT - HARD COATED
T2'008 ALU T6 DIFF SHORT OUTPUT SHAFT - HARD COATED XR305022
€19.07 (RRP inc. VAT)
#XR305350-K - ALU WHEEL HUB - BLACK (2)
ALU WHEEL HUB - BLACK (2) XR305350-K
€19.09 (RRP inc. VAT)
#XR305351 - ALU WHEEL HUB - OFFSET "-0.75MM" - BLACK (2)
ALU WHEEL HUB - OFFSET "-0.75MM" - BLACK (2) XR305351
€19.09 (RRP inc. VAT)
#XR305352 - ALU WHEEL HUB - OFFSET "+0.75MM" - BLACK (2)
ALU WHEEL HUB - OFFSET "+0.75MM" - BLACK (2) XR305352
€19.09 (RRP inc. VAT)
#XR305353 - ALU WHEEL HUB - OFFSET "+1.5MM" - BLACK (2)
ALU WHEEL HUB - OFFSET "+1.5MM" - BLACK (2) XR305353
€19.09 (RRP inc. VAT)
#XR305435 - HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM
HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM XR305435
€19.26 (RRP inc. VAT)
#XR305437 - HIGH-PERFORMANCE DRIVE BELT 3 x 300 MM
HIGH-PERFORMANCE DRIVE BELT 3 x 300 MM XR305437
€19.26 (RRP inc. VAT)
#XR306200-K - ALU SERVO MOUNT - BLACK (2)
ALU SERVO MOUNT - BLACK (2) XR306200-K
€19.76 (RRP inc. VAT)
#XR321254 - COMPOSITE ELEVATED CHASSIS SIDE BRACES L+R
COMPOSITE ELEVATED CHASSIS SIDE BRACES L+R XR321254
€17.98 (RRP inc. VAT)
#XR321322 - SCX GRAPHITE REAR BODY HOLDERS ADAPTER 2.2MM (2)
SCX GRAPHITE REAR BODY HOLDERS ADAPTER 2.2MM (2) XR321322
Login & Backorder
€19.75 (RRP inc. VAT)
#XR324132 - ALU 2-PAD SLIPPER CLUTCH PLATE 31MM WITH ADAPTER - LCG - SWISS 7075 T6
ALU 2-PAD SLIPPER CLUTCH PLATE 31MM WITH ADAPTER - LCG - SWISS 7075 T6 XR324132
€18.58 (RRP inc. VAT)
#XR326181 - STAINLESS STEEL BATTERY WEIGHT 35G
STAINLESS STEEL BATTERY WEIGHT 35G XR326181
€19.67 (RRP inc. VAT)
#XR332581 - ALU FRONT CHASSIS BRACE
ALU FRONT CHASSIS BRACE XR332581
€19.67 (RRP inc. VAT)
#XR333064 - GRAPHITE ROLL-CENTER BRIDGE 4.0MM
GRAPHITE ROLL-CENTER BRIDGE 4.0MM XR333064
€18.36 (RRP inc. VAT)
#XR334132 - BRAKE PAD "SLS" (2)
BRAKE PAD "SLS" (2) XR334132
€19.07 (RRP inc. VAT)
#XR336117 - GRAPHITE FRONT UPPER BRACE - TRIANGLE
GRAPHITE FRONT UPPER BRACE - TRIANGLE XR336117
Login & Backorder
€16.32 (RRP inc. VAT)
#XR338572 - ALU CLUTCH DISK - CONICAL - SWISS 7075 T6
ALU CLUTCH DISK - CONICAL - SWISS 7075 T6 XR338572
€19.67 (RRP inc. VAT)
#XR338577 - CLUTCH SHOE - HIGH DYNAMIC - YELLOW
CLUTCH SHOE - HIGH DYNAMIC - YELLOW XR338577
€19.07 (RRP inc. VAT)
#XR341331-M - COMPOSITE REAR BODY HOLDER - HIGHER - MEDIUM
COMPOSITE REAR BODY HOLDER - HIGHER - MEDIUM XR341331-M
€17.94 (RRP inc. VAT)
#XR343080 - GRAPHITE SHOCK TOWER REAR
GRAPHITE SHOCK TOWER REAR XR343080
€19.28 (RRP inc. VAT)
#XR343082 - GRAPHITE SHOCK TOWER REAR
GRAPHITE SHOCK TOWER REAR XR343082
Login & Backorder
€19.40 (RRP inc. VAT)
#XR343083 - GRAPHITE SHOCK TOWER REAR
GRAPHITE SHOCK TOWER REAR XR343083
€19.40 (RRP inc. VAT)
#XR343084 - GRAPHITE SHOCK TOWER REAR
GRAPHITE SHOCK TOWER REAR XR343084
€19.40 (RRP inc. VAT)
#XR344042 - BRAKE CAM POST - STEEL
BRAKE CAM POST - STEEL XR344042
Login & Backorder
€19.24 (RRP inc. VAT)
#XR344131 - BRAKE PAD "SLS" (2)
BRAKE PAD "SLS" (2) XR344131
€19.07 (RRP inc. VAT)
#XR344142 - BRAKE DISK ADAPTER - SWISS 7075 T6 - BLACK HARD COATED
BRAKE DISK ADAPTER - SWISS 7075 T6 - BLACK HARD COATED XR344142
Login & Backorder
€19.28 (RRP inc. VAT)
#XR345212 - ALU FRONT CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED
ALU FRONT CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED XR345212
€19.07 (RRP inc. VAT)
#XR345320 - REAR DRIVE SHAFT 61MM - HUDY SPRING STEELâ„¢
REAR DRIVE SHAFT 61MM - HUDY SPRING STEEL™ XR345320
€15.71 (RRP inc. VAT)
#XR345430 - PUR® REINFORCED DRIVE BELT FRONT 6.0 x 204 MM
PUR® REINFORCED DRIVE BELT FRONT 6.0 x 204 MM XR345430
€19.28 (RRP inc. VAT)
#XR345432 - LOW FRICTION DRIVE BELT FRONT 6.0 x 204 MM
LOW FRICTION DRIVE BELT FRONT 6.0 x 204 MM XR345432
€21.84 (RRP inc. VAT)
#XR345445 - LOW FRICTION DRIVE BELT SIDE 6.0 x 699MM
LOW FRICTION DRIVE BELT SIDE 6.0 x 699MM XR345445
€18.00 (RRP inc. VAT)
#XR345520 - CARRIER FOR 2-SPEED GEAR (2nd) - SWISS 7075 T6
CARRIER FOR 2-SPEED GEAR (2nd) - SWISS 7075 T6 XR345520
€19.09 (RRP inc. VAT)
#XR345570 - ADAPTER 2-SPEED
ADAPTER 2-SPEED XR345570
€19.28 (RRP inc. VAT)
#XR345571 - ADAPTER 2-SPEED SMALL
ADAPTER 2-SPEED SMALL XR345571
€19.28 (RRP inc. VAT)
#XR345711 - FRONT MIDDLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEELâ„¢
FRONT MIDDLE SHAFT - LIGHTWEIGHT - HUDY SPRING STEEL™ XR345711
€19.07 (RRP inc. VAT)
#XR346117 - GRAPHITE FRONT UPPER BRACE
GRAPHITE FRONT UPPER BRACE XR346117
Login & Backorder
€19.07 (RRP inc. VAT)
#XR346132 - RX8E GRAPHITE FAN HOLDER
RX8E GRAPHITE FAN HOLDER XR346132
€19.40 (RRP inc. VAT)
#XR351201 - GT COMPOSITE FRONT BUMPER
GT COMPOSITE FRONT BUMPER XR351201
€19.18 (RRP inc. VAT)
#XR351210 - GT COMPOSITE FRONT UPPER BUMPER
GT COMPOSITE FRONT UPPER BUMPER XR351210
€19.18 (RRP inc. VAT)
#XR351220 - GT FOAM BUMPER - V2
GT FOAM BUMPER - V2 XR351220
€19.09 (RRP inc. VAT)