Kit Class:
M18, NT1, NT18, RX8, T1, T2, T3, T4, X1, X10, X12, XB2, XB4, XB8, XB808, XB9, XII, XT, XT2
Kit Year:

Click here to open/close filters

Price (€):
to
Fitting Type:
Ball (5), Ball bearing (29), Clip (11), Cone Washer (3), Hex (57), Nut (6), Phillips (32), Pin (12), Set (2), Shim (8), Washer (16)
Keyword:
2-Speed (77), Antenna / Transponder (7), Anti-roll bar (267), Axle (78), Ball joint (57), battery (78), Battery holder (27), Bearing (109), Belt (90), Bevel gear (18), Body mount parts (18), Body post (25), Brake (56), Bulkhead (209), Bumper (69), C-Hub (85), Chassis (273), Clip (33), Clutch (139), CVD (53), Damper (2), deck (88), Diff (165), Drive shaft (166), Drive shaft - CVD (17), Drive shaft - ECS (5), Engine mount (15), Exhaust (9), Flywheel (20), Fuel Tank / tube (7), Hex (134), Impact (1), Layshaft (22), M3 (81), M4 (21), Motor Holder (4), O-ring (49), Pin (168), Pinion gear (133), Pivot Ball (50), Pivot Pin (50), Pulley (67), Radio plate / RX box (11), Rear hub (12), Rear Wing (23), Servo (171), Servo Horn (42), Servo horn / mount (7), Servo saver (64), shaft (288), Shim (123), Shock parts (69), Shock tower (114), Soft (41), Spring (491), Spur gear (68), Steering block (100), Steering plate (36), Suspension arm (197), Suspension holder (86), Turnbuckle (51), Upper/Top Deck (18), Upright (39), weight (44), Wheel hub (39)
Scale:
18th (2)
Thread Size:
M2 (2mm) (5), M2.3 (2.3mm) (4), M2.5 (2.5mm) (13), M3 (3mm) (38), M4 (4mm) (13), M5 (5mm) (1)
Transmission:
4wd (1)
Sort Results By: Part Number | Most Popular | RRP | Latest Product | In stock
#XR303456 - COMPOSITE ANTI-ROLL BAR o2.0MM BALL JOINT 4.9MM (4)
COMPOSITE ANTI-ROLL BAR o2.0MM BALL JOINT 4.9MM (4) XR303456
€9.16 (RRP inc. VAT)
#XR321122 - XB2 ALU CHASSIS - 2.0MM - MID-SIZE - REAR WIDE - SWISS 7075 T6
XB2 ALU CHASSIS - 2.0MM - MID-SIZE - REAR WIDE - SWISS 7075 T6 XR321122
€122.54 (RRP inc. VAT)
#XR321255 - COMPOSITE ELEVATED SIDE BRACES L+R - LONG
COMPOSITE ELEVATED SIDE BRACES L+R - LONG XR321255
€17.98 (RRP inc. VAT)
#XR321255-G - COMPOSITE ELEVATED SIDE BRACES L+R - LONG - GRAPHITE
COMPOSITE ELEVATED SIDE BRACES L+R - LONG - GRAPHITE XR321255-G
€23.78 (RRP inc. VAT)
#XR321280 - ALU FLAT CHASSIS BRACE FOR 5G GEAR BOX
ALU FLAT CHASSIS BRACE FOR 5G GEAR BOX XR321280
€32.40 (RRP inc. VAT)
#XR321281 - ALU FLAT CHASSIS BRACE FOR 3G GEAR BOX
ALU FLAT CHASSIS BRACE FOR 3G GEAR BOX XR321281
€32.40 (RRP inc. VAT)
#XR322117-H - SUSPENSION ARM FRONT - LSM - RIGHT - SHORT - HARD
SUSPENSION ARM FRONT - LSM - RIGHT - SHORT - HARD XR322117-H
€8.98 (RRP inc. VAT)
#XR322117-M - SUSPENSION ARM FRONT - LSM - RIGHT - SHORT - MEDIUM
SUSPENSION ARM FRONT - LSM - RIGHT - SHORT - MEDIUM XR322117-M
€8.98 (RRP inc. VAT)
#XR322127-H - SUSPENSION ARM FRONT - LSM - LEFT - SHORT - HARD
SUSPENSION ARM FRONT - LSM - LEFT - SHORT - HARD XR322127-H
€8.98 (RRP inc. VAT)
#XR322127-M - SUSPENSION ARM FRONT - LSM - LEFT - SHORT - MEDIUM
SUSPENSION ARM FRONT - LSM - LEFT - SHORT - MEDIUM XR322127-M
€8.98 (RRP inc. VAT)
#XR323026 - COMPOSITE 5G GEAR BOX - SET
COMPOSITE 5G GEAR BOX - SET XR323026
€26.28 (RRP inc. VAT)
#XR323029 - COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - SET
COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - SET XR323029
€26.28 (RRP inc. VAT)
#XR323029-G - COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - GRAPHITE - SET
COMPOSITE 3G GEAR BOX FOR CHASSIS BRACE - GRAPHITE - SET XR323029-G
€38.84 (RRP inc. VAT)
#XR323043-L - ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR COLLAR - 7075 T6
ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR COLLAR - 7075 T6 XR323043-L
€36.24 (RRP inc. VAT)
#XR323316 - ALU REAR LOWER SUSPENSION HOLDER FOR CHASSIS BRACE - FRONT
ALU REAR LOWER SUSPENSION HOLDER FOR CHASSIS BRACE - FRONT XR323316
€35.10 (RRP inc. VAT)
#XR324016-L - ALU MOTOR PLATE FOR 3G GEAR BOX -1MM - 1-DOT - SWISS 7075 T6
ALU MOTOR PLATE FOR 3G GEAR BOX -1MM - 1-DOT - SWISS 7075 T6 XR324016-L
€33.98 (RRP inc. VAT)
#XR324018 - ALU MOTOR PLATE FOR 5G GEAR BOX - SWISS 7075 T6
ALU MOTOR PLATE FOR 5G GEAR BOX - SWISS 7075 T6 XR324018
€33.98 (RRP inc. VAT)
#XR355635 - REAR CENTRAL DOGBONE DRIVE SHAFT 111MM - HUDY SPRING STEEL™
REAR CENTRAL DOGBONE DRIVE SHAFT 111MM - HUDY SPRING STEEL™ XR355635
€32.68 (RRP inc. VAT)
#XR361115 - XB4 ALU CHASSIS 2.0MM FOR LOW PROFILE BUMPER - SWISS 7075 T6
XB4 ALU CHASSIS 2.0MM FOR LOW PROFILE BUMPER - SWISS 7075 T6 XR361115
€87.12 (RRP inc. VAT)
#XR361202 - COMPOSITE FRONT BUMPER ALIGNED WITH CHASSIS
COMPOSITE FRONT BUMPER ALIGNED WITH CHASSIS XR361202
€6.02 (RRP inc. VAT)
#XR362089 - CARBON SHOCK TOWER FOR HS BULKHEAD - 2-DOTS - FRONT
CARBON SHOCK TOWER FOR HS BULKHEAD - 2-DOTS - FRONT XR362089
€42.73 (RRP inc. VAT)
#XR362251-G - COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - GRAPHITE
COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - GRAPHITE XR362251-G
€10.22 (RRP inc. VAT)
#XR362251-M - COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - MEDIUM
COMPOSITE STEERING BLOCK FOR CARBON EXTENSION PLATE - MEDIUM XR362251-M
€7.10 (RRP inc. VAT)
#XR362314 - ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-FRONT
ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-FRONT XR362314
€34.66 (RRP inc. VAT)
#XR362324 - ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-REAR
ALU LOWER SUSP. HOLDER FOR HS BULKHEAD - WIDE - FRONT-REAR XR362324
€34.66 (RRP inc. VAT)
#XR362481 - ANTI-ROLL BAR - SHORT - 1.1MM
ANTI-ROLL BAR - SHORT - 1.1MM XR362481
€9.16 (RRP inc. VAT)
#XR362482 - ANTI-ROLL BAR - SHORT - 1.2MM
ANTI-ROLL BAR - SHORT - 1.2MM XR362482
€9.16 (RRP inc. VAT)
#XR362483 - ANTI-ROLL BAR - SHORT - 1.3MM
ANTI-ROLL BAR - SHORT - 1.3MM XR362483
€9.16 (RRP inc. VAT)
#XR362484 - ANTI-ROLL BAR - SHORT - 1.4MM
ANTI-ROLL BAR - SHORT - 1.4MM XR362484
€9.16 (RRP inc. VAT)
#XR362486 - ANTI-ROLL BAR - SHORT - 1.6MM
ANTI-ROLL BAR - SHORT - 1.6MM XR362486
€9.16 (RRP inc. VAT)
#XR362488 - ANTI-ROLL BAR - SHORT - 1.8MM
ANTI-ROLL BAR - SHORT - 1.8MM XR362488
€9.16 (RRP inc. VAT)
#XR362489 - ANTI-ROLL BAR - SHORT - 2.0MM
ANTI-ROLL BAR - SHORT - 2.0MM XR362489
€9.16 (RRP inc. VAT)
#XR362624 - ADJUSTABLE TURNBUCKLE 50MM M3.5 L/R - HUDY SPRING STEEL™ (2)
ADJUSTABLE TURNBUCKLE 50MM M3.5 L/R - HUDY SPRING STEEL™ (2) XR362624
€14.89 (RRP inc. VAT)
#XR363088 - CARBON SHOCK TOWER FOR HS BULKHEAD - 3-DOTS - REAR
CARBON SHOCK TOWER FOR HS BULKHEAD - 3-DOTS - REAR XR363088
€42.73 (RRP inc. VAT)
#XR363114-G - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - GRAPHITE XR363114-G
€12.83 (RRP inc. VAT)
#XR363114-H - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - HARD
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - HARD XR363114-H
€9.04 (RRP inc. VAT)
#XR363114-M - COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER RIGHT - 3-HOLE - MEDIUM XR363114-M
€9.04 (RRP inc. VAT)
#XR363124-G - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - GRAPHITE
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - GRAPHITE XR363124-G
€12.83 (RRP inc. VAT)
#XR363124-H - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - HARD
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - HARD XR363124-H
€9.04 (RRP inc. VAT)
#XR363124-M - COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - MEDIUM
COMPOSITE SUSPENSION ARM REAR LOWER LEFT - 3-HOLE - MEDIUM XR363124-M
€9.04 (RRP inc. VAT)
#XR365203 - ECS FRONT DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™ - SET
ECS FRONT DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™ - SET XR365203
€58.93 (RRP inc. VAT)
#XR365227 - ECS DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™
ECS DRIVE SHAFT 84MM WITH 2.5MM PIN - HUDY SPRING STEEL™ XR365227
€34.66 (RRP inc. VAT)
#XR368014 - COMP. SHOCK CAP, SPRING COLLAR & BALL JOINT - BIG BORE (2)
COMP. SHOCK CAP, SPRING COLLAR & BALL JOINT - BIG BORE (2) XR368014
€10.20 (RRP inc. VAT)
#XR368024 - COMPOSITE SPRING COLLAR -2MM & -4MM - BIG BORE (2+2)
COMPOSITE SPRING COLLAR -2MM & -4MM - BIG BORE (2+2) XR368024
€10.20 (RRP inc. VAT)
#XR368102 - SHOCK ABSORBERS 30MM - BIG BORE - SET (2)
SHOCK ABSORBERS 30MM - BIG BORE - SET (2) XR368102
€90.00 (RRP inc. VAT)
#XR368123 - ALU SHOCK BODY 30MM - BIG BORE (2)
ALU SHOCK BODY 30MM - BIG BORE (2) XR368123
€40.92 (RRP inc. VAT)
#XR368162 - HARDENED SHOCK SHAFT 40MM (2)
HARDENED SHOCK SHAFT 40MM (2) XR368162
€18.47 (RRP inc. VAT)
#XR368202 - SHOCK ABSORBERS 35.5MM - BIG BORE - SET (2)
SHOCK ABSORBERS 35.5MM - BIG BORE - SET (2) XR368202
€90.00 (RRP inc. VAT)
#XR368224 - ALU SHOCK BODY 35.5MM - BIG BORE (2)
ALU SHOCK BODY 35.5MM - BIG BORE (2) XR368224
€40.92 (RRP inc. VAT)
#XR368263 - HARDENED SHOCK SHAFT 45MM (2)
HARDENED SHOCK SHAFT 45MM (2) XR368263
€18.47 (RRP inc. VAT)
#XR301078-K - X4 GLASS FIBER UPPER DECK - SPLIT REAR
X4 GLASS FIBER UPPER DECK - SPLIT REAR XR301078-K
€18.00 (RRP inc. VAT)
#XR301079-K - X4 GLASS FIBER UPPER DECK - SPLIT FRONT WAVE
X4 GLASS FIBER UPPER DECK - SPLIT FRONT WAVE XR301079-K
€18.00 (RRP inc. VAT)
#XR301250 - COMPOSITE ONE-PIECE LOW PROFILE UPPER HOLDER FOR BUMPER
COMPOSITE ONE-PIECE LOW PROFILE UPPER HOLDER FOR BUMPER XR301250
€7.98 (RRP inc. VAT)
#XR301973 - X4 ALU SHOCK HOLDER FRONT FIXED - LOWER - SWISS 7075 T6 (2)
X4 ALU SHOCK HOLDER FRONT FIXED - LOWER - SWISS 7075 T6 (2) XR301973
€43.56 (RRP inc. VAT)
#XR302182-G - X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT
X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT XR302182-G
€23.96 (RRP inc. VAT)
#XR302183-G - X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT
X4 CFF™ FRONT LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT XR302183-G
€23.96 (RRP inc. VAT)
#XR302670 - X4 COMPOSITE UPPER ARM LINKS 4.9MM (1+1+1+1)
X4 COMPOSITE UPPER ARM LINKS 4.9MM (1+1+1+1) XR302670
€9.88 (RRP inc. VAT)
#XR302975 - X4 ALU SHOCK HOLDER REAR FIXED - LOWER - SWISS 7075 T6 (2)
X4 ALU SHOCK HOLDER REAR FIXED - LOWER - SWISS 7075 T6 (2) XR302975
€33.77 (RRP inc. VAT)
#XR302976 - X4 ALU SHOCK HOLDER REAR ACTIVE - LOWER - SWISS 7075 T6 (2)
X4 ALU SHOCK HOLDER REAR ACTIVE - LOWER - SWISS 7075 T6 (2) XR302976
€33.77 (RRP inc. VAT)
#XR303182-G - X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT
X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - RIGHT XR303182-G
€23.96 (RRP inc. VAT)
#XR303183-G - X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT
X4 CFF™ REAR LOWER ARM - INNER SHOCK POSITION - GRAPHITE - LEFT XR303183-G
€23.96 (RRP inc. VAT)
#XR306280 - X4 ALU SERVO MOUNT HOLDER - REARWARD - SWISS 7075 T6
X4 ALU SERVO MOUNT HOLDER - REARWARD - SWISS 7075 T6 XR306280
€21.84 (RRP inc. VAT)
#XR306552 - XRAY PURE TUNGSTEN CHASSIS WEIGHT 10g
XRAY PURE TUNGSTEN CHASSIS WEIGHT 10g XR306552
€24.88 (RRP inc. VAT)
#XR308047 - XLP2 ALU SHOCK ADJUSTABLE NUT - BLACK (2)
XLP2 ALU SHOCK ADJUSTABLE NUT - BLACK (2) XR308047
€12.32 (RRP inc. VAT)
#XR308129 - XLP2 ALU PROGRESSIVE SHOCK SYSTEM - SET (2)
XLP2 ALU PROGRESSIVE SHOCK SYSTEM - SET (2) XR308129
€40.07 (RRP inc. VAT)
#XR308329 - XLP2 ALU SHOCK BODY (2)
XLP2 ALU SHOCK BODY (2) XR308329
€21.84 (RRP inc. VAT)
#XR308337 - XLP2 COMPOSITE SHOCK PARTS - 2 HOLES CAP
XLP2 COMPOSITE SHOCK PARTS - 2 HOLES CAP XR308337
€12.32 (RRP inc. VAT)
#XR308366 - XLP2 HARDENED SHOCK SHAFT (2)
XLP2 HARDENED SHOCK SHAFT (2) XR308366
€16.32 (RRP inc. VAT)
#XR962045 - WASHER S 4x5x0.2 (10)
WASHER S 4x5x0.2  (10) XR962045
€6.30 (RRP inc. VAT)
#XR970141 - O-RING 14 x 1.0 (10)
O-RING 14 x 1.0  (10) XR970141
€6.30 (RRP inc. VAT)
#XR371122 - X12 ALU 1-PIECE CHASSIS 2.0MM - SWISS 7075 T6
X12 ALU 1-PIECE CHASSIS 2.0MM - SWISS 7075 T6 XR371122
€112.42 (RRP inc. VAT)
#XR371166 - X12 CARBON REAR POD LOWER PLATE FOR 1-PIECE CHASSIS - FRONT
X12 CARBON REAR POD LOWER PLATE FOR 1-PIECE CHASSIS - FRONT XR371166
€40.07 (RRP inc. VAT)
#XR371167 - X12 CARBON REAR POD LOWER PLATE FOR 1-PIECE CHASSIS - REAR
X12 CARBON REAR POD LOWER PLATE FOR 1-PIECE CHASSIS - REAR XR371167
€40.07 (RRP inc. VAT)
#XR371186 - ALU HOLDER WITH 2 PINS FOR SIDE LINK CARBON PLATE - BLACK
ALU HOLDER WITH 2 PINS FOR SIDE LINK CARBON PLATE - BLACK XR371186
€15.20 (RRP inc. VAT)
#XR371187 - CARBON PLATE FOR 2 PINS FOR SIDE LINK (2)
CARBON PLATE FOR 2 PINS FOR SIDE LINK (2) XR371187
€13.63 (RRP inc. VAT)
#XR371213 - X12 CARBON BUMPER LOWER HOLDER FOR 1-PIECE CHASSIS
X12 CARBON BUMPER LOWER HOLDER FOR 1-PIECE CHASSIS XR371213
€13.63 (RRP inc. VAT)
#XR372094 - X12 CARBON FRONT BRACE FOR NARROW SUSPENSION ARM PLATE
X12 CARBON FRONT BRACE FOR NARROW SUSPENSION ARM PLATE XR372094
€10.75 (RRP inc. VAT)
#XR372140 - X12 CARBON LOWER SUSPEN. ARM PLATE FOR 1-PIECE CHASSIS
X12 CARBON LOWER SUSPEN. ARM PLATE  FOR 1-PIECE CHASSIS XR372140
€34.44 (RRP inc. VAT)
#XR372190 - FRONT COIL SPRING FOR 4MM PIN C=1.1 - BLACK (2)
FRONT COIL SPRING FOR 4MM PIN C=1.1 - BLACK (2) XR372190
€5.22 (RRP inc. VAT)
#XR372215 - X12 ALU STEERING BLOCK WITH TEFLON SLEEVE - RIGHT
X12 ALU STEERING BLOCK WITH TEFLON SLEEVE - RIGHT XR372215
€32.68 (RRP inc. VAT)
#XR372225 - X12 ALU STEERING BLOCK WITH TEFLON SLEEVE - LEFT
X12 ALU STEERING BLOCK WITH TEFLON SLEEVE - LEFT XR372225
€32.68 (RRP inc. VAT)
#XR372260 - X12 KINGPIN 4MM WITH HOLES - 0.5° 4 DOTS - NICKEL COATED (2)
X12 KINGPIN 4MM WITH HOLES - 0.5° 4 DOTS - NICKEL COATED (2) XR372260
€26.21 (RRP inc. VAT)
#XR372261 - X12 KINGPIN 4MM WITH HOLES - 1.0° 3 DOTS - NICKEL COATED (2)
X12 KINGPIN 4MM WITH HOLES - 1.0° 3 DOTS - NICKEL COATED (2) XR372261
€26.21 (RRP inc. VAT)
#XR372262 - X12 KINGPIN 4MM WITH HOLES - 1.5° 1 DOT - NICKEL COATED (2)
X12 KINGPIN 4MM WITH HOLES - 1.5° 1 DOT - NICKEL COATED (2) XR372262
€26.21 (RRP inc. VAT)
#XR372638 - HARD STEEL BALL END 3.7MM WITH 8MM THREAD - NICKEL COATED (2)
HARD STEEL BALL END 3.7MM WITH 8MM THREAD - NICKEL COATED (2) XR372638
€9.29 (RRP inc. VAT)
#XR372913 - X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - MOTOR - RIGHT
X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - MOTOR - RIGHT XR372913
€40.07 (RRP inc. VAT)
#XR372923 - X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - LEFT
X12 ALU REAR BULKHEAD FOR 1-PIECE CHASSIS - LEFT XR372923
€40.07 (RRP inc. VAT)
#XR373055 - X12 CARBON REAR BULKHEAD BRACE FOR 1-PIECE CHASSIS
X12 CARBON REAR BULKHEAD BRACE FOR 1-PIECE CHASSIS XR373055
€11.22 (RRP inc. VAT)
#XR373078 - ALU REAR BRACE MOUNT 15.5MM - BLACK (2)
ALU REAR BRACE MOUNT 15.5MM - BLACK (2) XR373078
€11.66 (RRP inc. VAT)
#XR373099 - X12 COMPOSITE PIVOT BRACE BUSHING FOR 3.7MM BALL END
X12 COMPOSITE PIVOT BRACE BUSHING FOR 3.7MM BALL END XR373099
€5.22 (RRP inc. VAT)
#XR373390 - ALU CHASSIS PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6
ALU CHASSIS PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6 XR373390
€21.78 (RRP inc. VAT)
#XR373391 - ALU POD PLATE PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6
ALU POD PLATE PIVOT HOLDER FOR 1-PIECE CHASSIS - SWISS 7075 T6 XR373391
€20.16 (RRP inc. VAT)
#XR373558 - X12 CARBON REAR POD UPPER PLATE FOR 1-PIECE CHASSIS
X12 CARBON REAR POD UPPER PLATE FOR 1-PIECE CHASSIS XR373558
€17.04 (RRP inc. VAT)
#XR373582 - TAPERED SPRING C=1.5-1.6 - SILVER (2)
TAPERED SPRING C=1.5-1.6 - SILVER (2) XR373582
€5.22 (RRP inc. VAT)
#XR373583 - TAPERED SPRING C=1.7-1.8 - GOLD (2)
TAPERED SPRING C=1.7-1.8 - GOLD (2) XR373583
€5.22 (RRP inc. VAT)
#XR373589 - SIDE SPRING C=0.5 - BLACK (2)
SIDE SPRING C=0.5 - BLACK (2) XR373589
€5.22 (RRP inc. VAT)
#XR373593 - COMPOSITE TAPERED/STRAIGHT SPRING HOLDER (2)
COMPOSITE TAPERED/STRAIGHT SPRING HOLDER (2) XR373593
€5.22 (RRP inc. VAT)
#XR375024 - X12 REAR SOLID AXLE SHAFT FOR 1-PIECE CHASSIS - LIGHTW. - HUDY SPRING STEEL™
X12 REAR SOLID AXLE SHAFT FOR 1-PIECE CHASSIS - LIGHTW. - HUDY SPRING STEEL™ XR375024
€46.21 (RRP inc. VAT)
#XR375043 - X12 ALU REAR ONE-PIECE WHEEL HUB - M2 SCREW - NARROW
X12 ALU REAR ONE-PIECE WHEEL HUB - M2 SCREW - NARROW XR375043
€19.07 (RRP inc. VAT)
#XR375222 - FRONT WHEEL AXLE 1MM LESS TRAIL - HUDY SPRING STEEL™ (2)
FRONT WHEEL AXLE 1MM LESS TRAIL - HUDY SPRING STEEL™ (2) XR375222
€18.47 (RRP inc. VAT)
Show per Page: 12, 20, 40, 100, 200
...
1
< Previous